Using The Cooktop; Operation Of The Burners - Thermador PRL486GDH Use And Care Manual

Using the Cooktop

Sealed STAR
Your new range has sealed STAR burners. Each burner
has a unique QuickClean
burner and area around the burner to be easier to clean.
There are no burner parts under the cooktop to clean,
disassemble or adjust.
On all models, the two left burners have the exclusive
®
ExtraLow feature, the remaining burners are standard.
Each burner has its own control knob.
ExtraLow ExtraLow ExtraLow Standard Standard Standard
ExtraLow ExtraLow ExtraLow Standard Standard Standard
Figure 10: 48" Burner Power Features
English 12
Burners
®
®
Figure 9: STAR Brass Burner Base
®
base feature which allows the
Standard Standard Standard
Standard Standard Standard
Control Knobs
The control knobs for two sealed gas burners, one in front
and one in the rear, are located directly in front of and
below the pair of burners on the control panel.
The symbol above each control knob identifies either the
burner position on the cooktop or the griddle control,
depending upon your model.
Left Rear Center Rear
Left Front Center Front

Operation of the Burners

1. Press in on the knob and turn it counter-clockwise to
the HI setting on the knob.
– The igniter for the selected sealed burner clicks
and sparks.
– After burner ignition, the igniter stops clicking.
2. Rotate the knob to any flame setting between HI and
SIM.
– The blue signal light, between the burner knobs,
will light when adjacent burners are lit. The light will
remain on until the adjacent burners are turned off.
Grill Rear Right Rear
Griddle
Grill Front Right Front
Figure 11: Cooktop Symbols