Table of Contents
Advertisement
MKS8502.IT.O/M.QXD
7/17/03
REPEAT PLAYBACK
1
1
To repeat a single track, press the
REPEAT button ❶ once; the
REPEAT indicator will blink.
Press the Skip/Search (
(
) button ❸ to select the
specific track that you wish to
repeat. When the desired track
number blinks in the display,
within five seconds, press the
PLAY/PAUSE (
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
1
Press the POWER button ❶ to
turn the unit on. Rotate the
MONITOR switch ❷ to the CD
position.
9:44 AM
Page 11
OPERATION (CONTINUED)
2
2
To repeat all of the tracks on a
disc continuously, press the
REPEAT button ❶ twice; the
) ❷ or
REPEAT indicator will light solid.
Press the Play/Pause (
button ❷ to repeat all tracks.
) button ❹ to
2
2
Press the CD Door OPEN/ CLOSE
button
Compartment door and insert your
disc in the CD player. Press the CD
Door OPEN/CLOSE button to close
the CD compartment door. Wait for
the CD player to read the table of
contents and display the total
number of tracks on the disc.
CONTINUED ON THE NEXT PAGE
1
2
)
to
open
the
CD
11
3
1
2
To cancel Repeat Playback,
press the REPEAT button ❶ until
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the Stop
(■) button ❷.
3
Press the PROGRAM button; "0"
will blink in the display and the
PROGRAM indicator will blink.
Advertisement
Table of Contents
