General Setup Menu - Memorex MVD2042 User Manual

GENERAL SETUP MENU:

Select SYSTEM SETUP using the Navigation (¦,‹) buttons, then select/change the setup option as described on page 14.
TV TYPE
1
SYSTEM SETUP
TV TYPE
SCREEN SAVER
TV SYSTEM
PASSWORD
RATING
DEFAULT
EXIT SETUP
NTSC: Select when using an NTSC TV.
PAL: Select when using a PAL TV.
IMPORTANT: In the USA, the standard is NTSC. When the
DVD player is turned on, it will be set to NTSC.
TV SYSTEM
1
SYSTEM SETUP
TV TYPE
SCREEN SAVER
TV SYSTEM TV SYSTEM
PASSWORD
RATING
DEFAULT
EXIT SETUP
4:3PS: Select when the unit is connected to a conventional TV.
Video material formatted in the Pan Scan style is played back in
that style (the left and right edges are cut off).
4:3LB: Select when the unit is connected to a normal TV.
Wide-screen images are shown on the screen with a black
band at the top or bottom.
16:9: Select when the unit is connected to a wide-screen TV.
SETUP MENU (CONTINUED)
NTSC
PAL
4:3PS
4:3LB
16:9
SCREEN SAVER
1
SYSTEM SETUP
TV TYPE
SCREEN SAVER
TV SYSTEM
PASSWORD
RATING
DEFAULT
EXIT SETUP
When this option is set to ON, the screen saver will come on
when the unit stops for approximately three minutes.
When this option is OFF, the screen saver will not come on.
DEFAULT
1
SYSTEM SETUP
TV TYPE
SCREEN SAVER
TV SYSTEM TV SYSTEM
PASSWORD
RATING
DEFAULT
EXIT SETUP
Select DEFAULT, then press the Navigation ‹ button to
highlight RESTORE. Press the ENTER button to restore the
DVD to its factory settings.
15
ON
OFF
RESTORE