AT&T 1070 Quick Reference Manual page 12

At&t 1070 4-line small business system with caller id/call waiting and speakerphone
Hide thumbs Also See for 1070:
Table of Contents

Advertisement

http://www.ochimp.com/
7
0:0AM
/
EXT 
INTERCOM TO
PAGE
0:0AM
/
EXT 
INTERCOM TO 
0:0AM
/
EXT 
INTERCOM TO
PAGE
0:0AM
/
EXT 
INTERCOM TO 
http://www.ochimp.com/
Intercom
Use this feature to make calls between system
7
phones. An intercom call rings at the extension
called with a repeating double-ring pattern.
Make an intercom call with the handset
.
If the one-touch preference is set to
INTERCOM, skip to step .
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM].
.
Press the one-touch button for the called
party, then lift the handset. The screen displays
INTERCOM TO and the destination extension
number.
Make an intercom call with the speakerphone
or headset
Use this feature to make an intercom call. With
the handset in the base unit:
.
If the one-touch preference is set to
INTERCOM, skip to step .
-OR-
If the one-touch preference is set to
TELEPHONE,
automatically turns on the intercom call in
the mode (headset or speakerphone) you
programmed (see the AUTOMATIC MODE
section of your installation guide).
.
Press the one-touch button. The screen
displays INTERCOM TO and the destination
extension number.
If the extension you called is idle or set to Do
Not Disturb, you hear long beeps. If the other
extension is on a call, you hear a busy signal.
NOTE: The intercom call automatically cancels
if you do not press a one-touch button within 0
seconds.
press [INTERCOM]. The phone
For More Info
Click Here ===>


Advertisement

Table of Contents
loading

Table of Contents