Location Of Controls - Memorex MT2327 Owner's Manual

FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are available
in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus up to 113 cable
channel frequencies. The actual number of channels received depends upon channel reception in your area or your cable
system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or French.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off automatically.
• Memory Back Up - This system prevents loss of memorized channel selections in case a power interruption to the TV should
occur.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, COLOR,
CONTRAST, SHARPNESS and TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired viewers.
• Stereo/SAP Reception - This TV is designed to receive stereo and separate audio program (SAP) broadcasts where available.
• Universal Remote Control - You can operate your VCR and Cable/Satellite Box after you have programmed the remote control
with the code that operates your products.

LOCATION OF CONTROLS

FRONT
CHANNEL
POWER
ENTER RESET
1 2 3
1. POWER Button - Press to turn the TV on or off.
2. Remote Sensor - Signals from the Remote Control unit
are received here.
3. CHANNEL / Buttons - Press to select a higher or
lower numbered channel set into memory.
(ENTER Button) - Press to enter or select information for
On-Screen operations.
(RESET Button) - Press, while in the On-Screen menu
mode, to reset the On-Screen picture adjustments to their
factory preset positions.
4. VOLUME / Buttons - Press to raise or lower the
level of the sound.
(MENU Buttons) - Press both buttons to display the On-
Screen menu functions.
(SET + / – Buttons) - Press to select the desired setting
during On-Screen operations.
4
3M00201A-E
(MONO)
– SET +
VIDEO IN L – AUDIO IN – R
VOLUME
MENU
4 5
4
BACK
IN OUT
VIDEO VIDEO
ANT(75 ) L/MONO
L/MONO
S-VIDEO
AUDIO AUDIO
R R
6 7 8 9
5. AUDIO (L / R) / VIDEO IN Jacks (AUX 2)-Audio and video
signal cables from an external source can be connected
here.
6. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
7. S-VIDEO IN Jack - S-Video signal cable from an external
source can be connected here.
8. REAR AUDIO (L/R) VIDEO IN Jacks (AUX 1) - Audio and
video signal cable from an external source can be
connected here.
9. REAR AUDIO (L/R) VIDEO OUT Jacks - Used to output
audio and video signals to a TV, amplifier or VCR.
10. AC Power Cord - Plug into an outlet having 120V,
60 Hz AC power only.
8/2/02, 2:13 PM
10