Pairing Your Bluetooth Device; Connecting To A Paired Bluetooth; Music Playback Functions - AT&T LoudSpeak’r BTS01 User Manual

Operational Instructions

Pairing your Bluetooth device

Note: Please see page 13 of this manual for Bluetooth compatibility information.
Step 1: On your Loudspeak'r:
- Make sure the speaker is powered off, and the master switch on the rear is in
the ON position.
- Press and hold the button until the front LED indicator flashes RED/BLUE.
- The speaker will say "Discovering".
- Your speaker is now in pairing mode and is ready to connect to your Bluetooth
device.
Note: The speaker will stay in pairing mode for up to 3 minutes.
Step 2: On your compatible Bluetooth device:
- Navigate to the Bluetooth menu on your device.
- Turn on Bluetooth and begin searching for available devices to pair.
- Select "LoudSpeak'r" from the list of results, and your device will begin to
pair.
- If your device asks for a pairing pass code, enter "0000".
- Once paired, you will hear a voice prompt and the LED indicator on the
speaker will only flash blue.
- The LoudSpeak'r has a wireless range of approximately 30 feet, and your
media device will stay connected to the speaker within that range.
Note: Many Bluetooth devices, including iPhone & iPad, will not require you to
enter a pairing pass code.
Page 8
Operational Instructions
Connecting to a Paired Bluetooth device
- You will only need to pair your Bluetooth device with the speaker one time.
- The next time your Bluetooth device and the speaker are in range of each other,
and the Bluetooth feature is turned on, they will automatically connect.
- The speaker will only automatically connect to the last Bluetooth device it was
connected to.
- If your paired device does not automatically connect, navigate to the Bluetooth
menu on your device and select LoudSpeak'r from the list.
Note: Your LoudSpeak'r can pair with and remember multiple devices, however it
can only connect with one device at a time.

Music Playback Functions

- Once your media device is connected to the speaker, simply start playing your
music, movie or game. All the audio will automatically be played through
LoudSpeak'r.
- Press to Play/Pause the audio.
- Press to skip to the next track.
- Press to skip to the previous track.
+ -
- Press or to adjust the volume level of the speaker.
- When maximum or minimum volume level is reached, you will hear an alert tone.
- During an incoming call, the music will automatically pause playback and you can
answer/reject the call using the button controls.
Note: The volume controls on your media device work separately from the volume
controls on the LoudSpeak'r.
Page 9