Welcome | Thank you for purchasing the WPS1 Introduction Features High powered Bluetooth waterproof speaker ® Wireless streaming through Bluetooth enabled devices Built-in microphone Auxiliary input to play music from any device Automatically connects to any paired devices Hands-free speakerphone...
Getting Started Location of Main Unit Controls Charging the WPS1 LED Status Indicator Powering ON/OFF Operational Instructions Bluetooth Operation Setting up your WPS1 for pairing Using the auxiliary input connection (3.5mm) Function-M Button controls Call function Troubleshooting Compliance with FCC Regulations...
Safety Information Warning! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. WARNING: To The exclamation and arrowhead reduce the risk point within symbol within of electric shock, the triangle is the triangle is do not remove a warning sign...
Safety Information Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in this user’s manual and on the unit.
Page 7
Lightning - Unplug the unit from the wall outlet and disconnect the antenna unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading - Do not overload wall outlets, extension cords, or integral 10.
Getting Started Location of Main Unit Controls Top View Back View DC 5V Decrease Volume - | 5. Mode Skip to previous track 6. LED light - Bluetooth indicator 2. LED light - charging 3. Increase Volume + | Answer/End Call Skip to next track 8.
Getting Started Charging the WPS1 Connect a Micro USB charging cable to the charging port on the WPS1. 2. Connect the USB end of the Micro USB cable to your computer’s USB port or an AC USB adapter. 3. When the speaker is charging, the LED indicator light located on the top panel of the speaker will turn red.
Navigate to the Bluetooth manager on your Bluetooth device Search Bluetooth devices and select ‘WPS1’ to start connecting. Once paired, the WPS1 will beep and the Bluetooth LED light will turn solid blue. Your Bluetooth device is now paired, connected, and ready to...
Using the Auxiliary Input Connection (3.5mm) You can connect the audio output of an external device, such as a MP3 player or smartphone, to the WPS1 for listening to the audio of that device through the speaker system. Use a standard stereo headphone (3.5 mm) cable to connect the “headphone-out”...
No power Recharge your speaker using included cable. If the problem cable. Battery is not charging Verify WPS1 is plugged in properly and into a proper power source. Power Output: 3W Play time: Up to 4-5 hours Impedance: 4 Rechargeable Battery: 3.7V/1200mAh (Built-In)
Compliance with FCC Regulations Caution! party responsible for compliance could void the user’s authority to operate the measures: and operated to provide a separation distance of at least 20 cm from all persons THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE SPEAKER SYSTEM ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Warranty Information Limited Warranty The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1 (888) 920-8680 from the USA or Canada. Exclusions: REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER;...
Page 15
Some states do not allow the exclusion or limitations of incidental or consequential damages, or limitations on how long the warranty lasts. In these cases the above exclusions or limitations may not apply to you. rights which vary from state to state. Obtaining Service: the date of purchase, model number and a brief description of the 1-800-8-BATTERY.
Page 17
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ...