HP EliteBook Folio 1040 G2 Maintenance And Service Manual page 71

3. To remove the system board, be sure to lift near the middle of the board near the connectors as shown
by callout (1) in the following image.
CAUTION: To avoid damaging or breaking the system board, when removing the board, lift up near the
middle of the board. Do not lift up on the narrow end of the board.
4. Lift the right side of the system board up at an angle (2).
5. Pull the system board away from and out of the computer (3), making sure the connectors on the side
of the board are clear of the computer.
Use the following image to determine all Mylar locations on the system board.
Component replacement procedures 63