●
WLAN module (see
●
Heat sink (see
Remove the system board:
1.
Disconnect the following cables:
●
(1): Power connector
●
(2): Speaker
●
(3): Display panel
●
(4): NFC module cable
●
(5): Fingerprint reader
●
(6): RTC battery
●
(7): Multi-function board
2.
Remove the four Phillips PM2.0×3.0 screws that secure the system board to the computer.
62
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
WLAN module on page
Heat sink/fan assembly on page
48)
59)