Table of Contents
Advertisement
DISPLAY
1
Press the DISPLAY button once to show the time. Press
again to show the mode (i.e. S-VIDEO). Press a third time
to clear the screen or wait three seconds and the screen
will clear automatically.
AUDIO MODE
1
Press to select a mode (PRESET, SOFT or USER) as set
on page 29.
NOTE: You cannot change the audio MODE while using
the Y Pb Pr or computer inputs..
CHANNEL LOCK
1
Channel Lock provides instant access to one of your
favorite channels at the touch of a button. To set, go to the
channel you want to set as the channel lock, then press
and hold the CHANNEL LOCK button on the remote until
the on-screen display shows "LOCKED"; the channel is
now locked in. To access, simply press the CHANNEL
LOCK button on the remote and the TV will automatically
tune to that channel.
TV OPERATION (CONTINUED)
VIDEO MODE
Press to select a mode (PRESET, SOFT or USER) as set
on page 28.
NOTE: You cannot change the video MODE while using
the Y Pb Pr or computer inputs.
VIDEO MUTE
Press and the picture will disappear from the screen, but
the sound will still be heard.
SRS
This feature allows the TV's left and right speakers to
provide a surround sound effect.
Press to cycle through the surround modes as follows:
SURROUND 1: Simulated stereo
SURROUND 2: Stereo surround
SURROUND 3: Mono surround
SURROUND OFF: To turn off surround sound.
25
1
1
1
Advertisement
Table of Contents
