Hdtv Connection; Computer Connection - Memorex MT3010OM User Manual

Follow the instructions below to connect an HDTV set top box to your television. (CABLES NOT INCLUDED.)
HDTV SET
TOP BOX
From HDTV
OUT jacks
1. Connect the left and right audio cable from the HDTV's Audio OUT jacks to the TV's HDTV left and right Audio IN jacks.
2. Connect a video cable from the Y, Pb, Pr OUT jacks to the TV's HDTV IN jacks.
3. Press the TV/VIDEO/PC button until Y Pb Pr appears on the TV screen.
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
REAR OF TV
To VGA
IN jack
1. Connect the left and right audio cable from the computer's Audio OUT jacks to the TV's left and right VGA AUDIO IN jacks.
2. Connect a VGA cable from the computer's VGA OUT jack to the TV's VGA IN jack.
3. Press the TV/VIDEO/PC button until PC appears on the TV screen.
4. Refer to the computer's owner's manual for instructions.

HDTV CONNECTION

AUDIO/VIDEO Cord
From HDTV
AUDIO OUT jacks
To TV AUDIO
IN jacks
Video Cord
To TV P
P ,Y IN jacks
B

COMPUTER CONNECTION

COMPUTER
From AUDIO
OUT jacks
To AUDIO
IN Jacks
REAR OF TV
,
R
When connected to a computer and
the unit is in the PC mode, you can
then adjust the following after
pressing the MENU button:
From VGA
OUT jack
H position: Horizontal (left and right)
position on the screen.
V position: Vertical (up and down)
position on the screen.
Phase: Adjust the phase to get the
best picture.
14