Table of Contents
Advertisement
MPH2410.O/M.QXD
3/7/03
TELEPHONE OPERATION (CONTINUED)
USING THE TEMPORARY TONE
1
If you are in a Pulse dialing area you
may still take advantage of touch-tone
services after dialing to respond to
touch-tone prompts. To do this, press
the Temporary Tone/
temporarily change the dialing mode
from Pulse to Tone after dialing in the
Pulse mode. This will enable Pulse
users to access touch-tone services. It
will revert back to Pulse after hanging
up.
PAGING THE HANDSET
1
Press the PAGE button on the base to
locate the handset when not in use;
the handset will beep for one minute
and "PAGING" will appear in the
display during paging. Press the
PAGE button again on the base to
stop.
9:35 AM
Page 24
CALL WAITING
1
If you subscribe to Call Waiting through
your local phone company, and you
receive another phone call while having
a conversation, the phone will alert you
with a beep and the display will show the
Button to
name and number of the second caller.
Simply press the EDIT/FLASH button to
answer the new call. Press the
EDIT/FLASH button again to return to
the original call. Call Waiting Caller ID
also needs to be subscribed to in order
to see the new caller's name/number on
the display if you are already on the
phone.
INSERTING A PAUSE
1
In some cases, such as a PBX or long
distance service, a pause may be
needed in the dialing sequence.
Pressing the SAVE/RE/PA button on
the handset will insert a four second
delay between dialed numbers.
Pauses can also be entered in
programming dialing sequence in
memory dialing.
24
Advertisement
Table of Contents
