Setting Up Your Phone; Raising The Antenna; Adjusting Ringer/Volume Controls; Ringer Tone And Volume - Memorex mph 6955 Owner's Manual

Color profile: Disabled
Composite Default screen

Raising the Antenna

Raising the Antenna
Before using your phone, be sure to raise its antenna to the Before using your phone, be sure to raise its antenna to the
vertical position. vertical position.

Adjusting Ringer/Volume Controls

Adjusting Ringer/Volume Controls

Ringer Tone and Volume

Ringer Tone and Volume
1. While the phone is not in use, press VOLUME . 1. While the phone is not in use, press VOLUME .

Making and Receiving Calls

Making and Receiving Calls
When the phone rings, remove the handset from the base.
Answer call

(AutoTalk)

1. Remove the handset from the base and press TALK .
2. The TALK LED lights.
Make call
3. Listen for the dial tone.
4. Dial the number.
Return handset to the base. (AutoStandby)
Hang up
1. Remove the handset from the base and press TALK .
2. Listen for the dial tone.
Redial
3. Press REDIAL to dial the number.

Storing a Number in Memory

Storing a Number in Memory
Your MPH 6955 phone has 10 memory locations for storing Your MPH 6955 phone has 10 memory locations for storing
important telephone numbers. important telephone numbers.
1. Remove the handset from 1. Remove the handset from
the base and press MEM . the base and press MEM .
The TALK LED flashes and The TALK LED flashes and
you hear a beep. you hear a beep.
2. Enter the phone number 2. Enter the phone number
you want to store (up to you want to store (up to
16 digits). 16 digits).
You have 20 seconds after pressing MEM
to enter the number you wish to store.
NOTE
Otherwise, an error tone will sound.
H:...MPH 6955 Map OM.vp
Mon Jun 28 16:00:18 1999

Setting Up Your Phone

Setting Up Your Phone
2. The phone has two ringer tones, each with two volume levels. 2. The phone has two ringer tones, each with two volume levels.
1. While you are on a call, press VOLUME . 1. While you are on a call, press VOLUME .
2. The phone has three receiver volume levels, Normal, High and 2. The phone has three receiver volume levels, Normal, High and

Using Your Phone

Using Your Phone
Handset on Base
3. Press MEM and enter a number (0-9) on the keypad for 3. Press MEM and enter a number (0-9) on the keypad for
8
Press VOLUME again until you hear the ringer tone and Press VOLUME again until you hear the ringer tone and
volume level you want. volume level you want.

Setting the Handset Earpiece Volume

Setting the Handset Earpiece Volume
Loud. Press VOLUME again until you hear the volume level Loud. Press VOLUME again until you hear the volume level
you want. When you hang up, the phone keeps the last you want. When you hang up, the phone keeps the last
volume setting selected. volume setting selected.
Handset off Base
Press any key.
1. Pick up the handset and press TALK .
2. The TALK LED lights.
3. Listen for the dial tone.
4. Dial the number.
Press TALK .
1. Pick up the handset and press TALK .
2. Listen for the dial tone.
3. Press REDIAL to dial the number.
the memory location you want to use. the memory location you want to use.
You hear a long beep and the TALK LED goes out indicating You hear a long beep and the TALK LED goes out indicating
the number has been stored successfully. the number has been stored successfully.
If you select any keys other than 0-9, the handset will beep If you select any keys other than 0-9, the handset will beep
rapidly and no number will be stored. rapidly and no number will be stored.
You cannot store numbers in M1 , M2 , or
M3 . Refer to "One-Touch Dialing."
NOTE