Setting The Flash Time - Memorex MPH2410 Operating Instructions Manual

MPH2410.O/M.QXD 3/7/03

SETTING THE FLASH TIME

This unit enables you to select the standard flash time applicable to your calling
area, which is useful when "clicking" over to a call waiting call or for PBX systems.
If you are not sure of the flash time, call your local telephone company. Set the
Flash Time while in the Standby mode as follows:
1
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
3
Press the EDIT/FLASH button to
change the setting; the Flash Time
setting will blink.
5
When the desired Flash Time setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
9:35 AM Page 16
SET-UP INSTRUCTIONS (CONTINUED)
2
1
Press the Scroll Down button
times or the 7 key button
Time setting will appear.
4
1
Press the Scroll Up
button to select a desired Flash Time
(in milli-seconds).
6
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
16
2
six
; the Flash
2
or Down