To Set Or Reset The Alarm Time - Memorex MC7101 User Manual

TO SET OR RESET THE ALARM TIME

1
1
With the power off, press the desired ALARM
1 1 or ALARM 2 2 button; the Alarm 1 or
Alarm 2 time and settings will appear.
3
1
Repeatedly press the ALARM 1 1 or ALARM
2 2 button to select alarm off, alarm on for
buzzer, radio or CD.
NOTE: Make sure the corresponding
indicator (BUZZER/CD/RADIO) appears in
the display.
SEE NEXT PAGE FOR IMPORTANT ALARM NOTES.
OPERATION (CONTINUED)
2
2
2
4
1
Press and hold the desired ALARM 1 1 or
ALARM 2 2 button; the alarm time will blink.
Press the MINUTE button 3 to set the alarm
minute and the HOUR button 4 to set the
alarm hour. Make sure to set the correct
AM/PM setting. Press the ALARM 1 1 or
ALARM 2 2 button again (or wait approx. 15
seconds); the alarm time will stop blinking.
4
If set to CD, within 5 seconds, set the track number
using the Tune/Skip/Search l 1 or m 2 button. When
the alarm time is reached, the unit will start playback
on the track that you selected and the tracks following
it, then stop.
NOTES:
• When you have selected a track number, after five
seconds, the track number will be set and the
actual time will appear in the display again.
• If the selected track is not available (i.e. there are a
total of 10 tracks on the disc but you have selected
track 11), when the alarm time is reached,
playback will start from the first track.
If set to Radio, within 5 seconds, set the band (AM or
FM) and the frequency using the Tune/Skip/Search l
1 or m 2 button. When the alarm time is reached, the
unit will turn on the band (AM or FM) and the
frequency that you selected.
NOTE: When you have selected the radio band and
frequency, after 5 seconds, the radio frequency will be
set and the actual time will appear in the display again.
15
2
2
1