To Set The Alarm To Wake To Buzzer; To Shut The Alarm Off - Memorex MC1886 User Manual

TO SET THE ALARM TO WAKE TO BUZZER

1
Set the alarm time as previously
instructed. Slide the Alarm switch to
the 1, 2 or 1+2 position. Select 1+2 to
activate both alarms.

TO SHUT THE ALARM OFF

1
2
SNOOZE
1
NOTE: In Dual Alarm mode, if both alarms are set, the Snooze feature will only
operate up to the next alarm. If the next alarm time is reached, the unit
automatically turns on for 59 minutes and then shuts off.
OPERATION (CONTINUED)
1
The alarm can be temporarily turned off manually by
pressing the SNOOZE button; the alarm will turn back
on automatically 7 minutes later. It can be repeated
endlessly. With the actual time showing in the display,
press and hold the SNOOZE button, the display will
change to show the last digit of the minute (at the left
digit) of the actual time and the seconds (at the right
two digits). ( i.e. If the actual time is "12:28" when you
press and hold the SNOOZE button, then the left digit
will show "8" and the right two digits will count up for
the seconds of the actual time.)
2
Slide the FUNCTION switch to the BUZZ
position. When the actual time matches
the selected preset alarm time(s), the
unit automatically turns on.
To shut off the alarm, see TO SHUT THE
ALARM OFF section below.
To shut the alarm off, press the
ALARM OFF button ‚ once and the
alarm time will be reset for the next
day. Slide the FUNCTION switch ƒ
to the OFF position to turn off the
alarm and not set it for the next day.
9