Kenwood ts-990s Instruction Manual page 29

CONFIGURING THE KEY REPEAT DELAY TIME
You can configure the delay time until the key repeat
begins.
1 Select Group No. 9, "USB", from the Menu screen.
2 Access Menu 02, "Repeat Delay Time (USB
Keyboard)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5) to select the delay time.
• The delay time can be selected from "1" to "4".
• The default is "2".
5 Press [ ] (F1).
6 Press [MENU] to exit.
CONFIGURING THE KEYING SPEED
You can configure the keying speed for the USB keyboard.
1 Select Group No. 9, "USB", from the Menu screen.
2 Access Menu 03, "Repeat Speed (USB Keyboard)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH
control to select the key repeat speed.
• The key repeat speed can be selected from "1" to "32".
• The default is "1".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Contents Index
ENABLING USING USB KEYBOARD TO SEND A
MESSAGE
If the transceiver is configured as described below,
pressing a PF key on the USB keyboard transmits a Voice
or text message.
• The transmission of a message using a USB keyboard is
enabled:
• "Voice" or "Message" is assigned to a PF key on a USB
keyboard:
Refer to the following for the method to assign a voice or a
text message to the USB keyboard.
• Recording a Voice Message
• CW Message Memory {page 5-22}
• Utilizing a RTTY Message Memory
• Utilizing a PSK Message Memory
1 Select Group No. 9, "USB", from the Menu screen.
2 Access Menu 00, "Send Message by Function Keys
(USB Keyboard)".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5) to select "On".
The default is "On".
5 Press [ ] (F1).
6 Press [MENU] to exit.
Note:
◆ If two sets of USB keyboards are connected to the transceiver, the
transceiver recognizes the USB keyboard connected first.
◆ You cannot select a channel where no message is stored.
◆ In FSK or PSK mode, a message can be transmitted following the
configuration for the channel where a message is stored.
In FSK or PSK mode, a message can be transmitted while the
RTTY Encode/Decode screen is open.
USEFUL FUNCTIONS 16
{page 13-1}
{page 5-40}
{page 5-57}
16-11