2.10
Intel
This function allows you to configure the Intel
Ensure that the ME function is enabled before configuring the settings. To enable the ME
function, refer to pages 1-26 and 2-24 for details.
To open the Intel
The following screen appears after the Power-On-Self-Test (POST). Press <Ctrl> + P to
launch the Intel
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
Intel(R) ME Firmware version 5.0.0.1098
Press <CTRL-P> to enter Intel(R) ME Setup.
2.10.1
Change Intel
You are required to change the password when entering the setup for the first time.
By default , the password is admin.
To change the password:
Key in admin in the Intel(R) ME Password area, then press <Enter>.
1.
Key in a new password in the Intel(R) ME New Password area and press <Enter>.
2.
Key in the password again in the Verify Password area and press <Enter>.
3.
A valid password must include uppercase and lowercase letters, special characters (such
as ~,%,*,#), and numbers.
[ESC]=Exit
ASUS P5Q-EM DO
P5Q-EM DO.indb 41
ME configuration
®
ME Setup
®
ME Setup screen.
®
ME password
®
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
[
Intel(R) ME Configuration
Change Intel(R) ME Password
Exit
Intel(R) ME Password
Management Engine (ME) settings.
®
MAIN MENU
]
[Enter]=Access
2-41
12/9/08 12:36:13 PM