Chipset - Asus P5Q-EM DO User Manual

2.5.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the sub-menu.
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
ME Subsystem Configuration
VE Subsystem Configuration
North Bridge Chipset Configuration
Advanced
North Bridge Chipset Configuration
Memory Remap Feature
Initiate Graphic Adapter
IGD Graphics Mode Select
GTT Graphics Memory Size
PAVP Function
DVMT Memory
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory above
the total physical memory. Enable this option only when you install
64-bit operating system.
Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, XXMB]
Allows you to select the size of system memory used by the internal graphics device.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 48MB] [Enabled, 64MB]
[Enabled, 128MB] [Enabled, 256MB]
GTT Graphics Memory Size [No VT mode, 2MB]
This item is not available.
PAVP Function [Disabled]
Allows you to set the GMCH Protected Audio Video Path (PAVP) BIOS support.
Configuration options: [Disabled] [Lite Mode] [Paranoid]
DVMT Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
ASUS P5Q-EM DO
P5Q-EM DO.indb 23
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Enabled]
[PEG/PCI]
[Enabled, 32GB]
[No VT mode, 2MB]
[Diabled]
[256MB]
Configure North Bridge
features.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
12/9/08 12:35:48 PM
2-23