Table of Contents
Advertisement
2.
Press the load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket
pins, do not remove the PnP cap
unless you are installing a CPU.
3.
Lift the load lever in the direction of the
arrow to a 135º angle.
4.
Lift the load plate with your thumb and
forefinger to a 100º angle (4A), then push
the PnP cap from the load plate window
to remove (4B).
5.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket then fit
the socket alignment key into the CPU
notch.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
ASUS P5Q-EM DO
P5Q-EM DO.indb 9
Retention tab
A
B
Load lever
PnP cap
Load plate
4B
3
CPU notch
Alignment key
4A
Gold
triangle
mark
1-9
12/9/08 12:33:22 PM
Hide quick links:
Advertisement
Table of Contents
