Step 2: Finding Programs To Watch; Quick Tour Of Basic Features - Dish Network DishPro 322 Manual

Chapter 1
Introduction
Tip: The Program
Guide provides a
complete listing of
all programs
available on all
channels, including
those that are not in
your subscription
(these channels
have red
backgrounds).
Page 4
4. Call the Customer Service Center at 1-800-333-DISH (3474). A
customer service representative will help you start DISH Network
programming on your system and will discuss the various programming
packages available.
5. Choose a package and the representative will authorize your
programming.
6. Press SELECT to close the
7. Wait a few minutes and the channels you purchased will turn from red to
white, and can now be viewed.

Step 2: Finding Programs To Watch

1. Press the GUIDE button.
2. When the Program Guide
ARROW to view information on other channels. The
channels for the programming you ordered should be
shown in white and are available for viewing. After you
have highlighted a current program in the
, press SELECT to watch it.
Guide

Quick Tour of Basic Features

This tour guides you quickly through a number of basic satellite receiver
features accessible directly from the remote control without using menus.
For more detailed information about each feature, see Chapter 3, Using the
System.
1. Make sure the TV is on.
2. Press the UP or DOWN ARROW button to change
channels.
3. Press the RECALL button to go back to the last channel you
watched.
4. Press the THEMES (LEFT ARROW) button to open the
Themes and Search
search for programming by themes (movies, sports, and
more) or by key words used in the programming
information.
Important System Information
opens, use the UP or DOWN
Program
menu. This menu allows you to
screen.