IV. BIOS SOFTWARE
PNP and PCI Setup
This "PNP and PC1 Setup" option configures the PC1 bus slots. All PC1 bus slots on
the system use INTA#, thus all installed PC1 cards must be set to this value.
NOTE: SETUP Defaults are noted in parenthesis next to each function heading.
Details of P/VP and PC/ Setup
PNP OS Installed (No)
When Plug and Play operating systems (OS) are installed, interrupts may be reas-
signed by the OS when Yes is selected. When a non-Plug and Play OS is installed or
to prevent reassigning of interrupt settings, select No here.
50