Table of Contents
Advertisement
3. Real Time Clock (RTC) RAM (RTCLR)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and unplug the AC power, (2) Move this
jumper to "Clear Data," (3) Move the jumper back to "Operation," (4) Plug in
the AT power and turn on your computer, (5) Hold down <Delete> during bootup
and enter BIOS setup to re-enter user preferences.
Battery Test Jumper (RTCLR)
You can test the battery's current by removing this jumper and attaching a cur-
rent meter to pins l&2. WARNING: You must unplug the power cord to
your power supply to ensure that there is no power to your motherboard.
The CMOS RAM containing BIOS setup information may be cleared by
this action. You should enter BIOS to "Load Setup Defaults" and re-enter
any user information after removing and reapplying this jumper.
RTC RAM RTCLR
Operation
Clear Data
RTCLR
RTCLR
Battery Test
Operation (Default) Clear Data
RTC RAM (Operation
Clear Data)
17
Advertisement
Table of Contents
