Table of Contents
Advertisement
IV. BIOS SOFTWARE
Drive A / Drive B (None)
These fields record the types of floppy disk drives installed in your system. The
available options for drives A and B are: 360KB, 5.25 in.; I.2MB, 5.25
in.;
3.5
To enter the configuration value for a particular drive, highlight its corresponding
field and then select the drive type using the left- or right-arrow key.
Floppy 3 Mode Support (Disabled)
This is the Japanese standard floppy drive. The standard stores 1.2MB in a 3.5"
diskette. This is normally disabled but you may choose from either:
B, Both, and Disabled
Video (EGA/VGA)
Set this field to the type of video display card installed in your system. The options
EGAIVGA, Mono (for Hercules or MDA), CGA 40, and CGA 80
are:
If you are using a VGA or any higher resolution card, choose the "EGA/VGA"
option.
Halt On (All Errors)
This field determines which types of errors will cause the system to halt. Choose
All Errors, No Errors, All, But Keyboard, All, But Diskette, and All, But Disk1
from :
in.; 2.@MB, 3.5 in.; None
in.;
Drive A, Drive
41
Advertisement
Table of Contents
