Fisher & Paykel ActiveSmart E331T Installation Instructions And User Manual page 23

ActiveSmart
Humidity Control System (where fitted)
Important!
When cleaning the shelf above the vegetable bin(s),
we recommend that you do not disassemble the
Humidity Control System from the shelf.
In the event that the humidity control lid (plastic
lid) and humidity slides become separated from the
glass shelf, follow these instructions to reassemble.
Turn shelf upside down.
1
To attach humidity slides onto shelf
2
front corners, fit bottom clips into shelf
front trim. Next, slide sideways towards
shelf until arm clips onto glass.
To attach humidity control lid – with
3
text facing you, align lid with front of
shelf. Hold lid vertically and fit front
end into retainer on shelf. Ensure lid
fits into retainer as well as underneath
humidity slides.
At the sides of the shelf, adjust
4
humidity slide tabs so that the plastic
lid is between the shelf and the tabs.
If clips on back of shelf are present,
5
fasten lid with rear clips. Ensure that
the cover is fully secure at front and
back of shelf.
cleaning care – special features
™
Retainer
Humidity Slides
Fig.8 Humidity Control System cleaning
21