Head-Up Display - Cadillac 2009 STS Get To Know

111983_09a_STS_GTK_042908.qxd:STS 2007 A
Warnings and Messages
If a problem is sensed in one of
your vehicle's systems, a warning
or message will appear on the
DIC display.
Note: Your vehicle's warnings and messages
provide critical information that can
prevent damage to your vehicle. Review
your Owner Manual to become familiar
with the information displayed and the
action required.
Check Engine or other Warning
Lights with OnStar® (if equipped)
If your CHECK ENGINE light, or any
other warning message appears,
you can push the blue OnStar
button and speak to a live advisor.
OnStar Advisors can access certain
diagnostic information and can tell
you how serious the problem is,
what you should do about it, or can
contract a dealer or Roadside service
for you. Refer to the OnStar Owner
Guide for details.
See Section 3 of your Owner Manual
for detailed DIC system information.
4/29/08 5:18 PM Page 6
S T S
HEAD-UP DISPLAY (if equipped)
The Head-Up Display (HUD) projects
some important driver information
from the instrument panel cluster
onto the windshield, reducing the
need to look away from the road.
The information appears as an image
toward the front of the vehicle. The
HUD displays the speedometer,
turn signal indicators, high-beam
headlamps indicator symbol,
adaptive cruise control features/
indicators, check gages icon, and
some radio and navigation features.
The HUD controls are located on the
left side of the instrument panel.
(Up/Down Adjustment):
Press this button (A) to adjust the
up/down position of the HUD
image on the windshield. (It cannot
be adjusted side-to-side.) Press the
up arrow to move the HUD image
A
up and the down arrow to move the
HUD image down.
Brightness: Use this knob (B) to
adjust the brightness of the HUD
B
image as well as the instrument
cluster and interior lighting. Press
and release the knob so that it pops
out, and then turn the knob to
increase or decrease the brightness
of the instrument cluster and
interior lighting. Pull out the knob
to the second detent in order to
increase or decrease the brightness
of the HUD image.
Off: With the knob (B) pulled out to
the second detent, turn it all the way
to the left to turn off the HUD image.
The Speed Alert feature can be set
to display an alert when the vehicle
speed exceeds the posted or
recommended set speed.This feature
is turned on or off, and the speed is
set, through the Driver Information
Center (DIC). The speedometer in
the HUD will display yellow or red
when a speed alert is present.