Advertisement
Quick Start Guide
XL Storage Heater
QS027
This guide is for quick reference only. Refer to XL/XLN installation and operating instructions for further information
XL storage heater
Control positions
Heater controls
Input control — controls the temperature of the heater
Adjust control for the first few days until your ideal room
temperature is found. The higher the setting, the warmer your heater will get.*
Boost control — controls the amount of heat given later in the day
Normally leave boost setting at minimum. Turn up if more heat is required later
in the day. Leaving the control on a higher setting will provide automatic boost
each day.
On/Off switch
Leave on for heating season
WARNING: Walls, curtains and furniture should be at least 75mm away from the top and sides of the heater. Furniture and other
obstructions should be at least 150mm from the front of the heater. DO NOT COVER or obstruct the air inlet or outlet grilles.
PLEASE REFER TO THE OPERATING AND INSTALLATION INSTRUCTIONS FOR FURTHER SAFETY ADVICE.
* NOTE: Changes to the input control setting will not come in to affect until the next period of off peak (cheap rate) electricity is available.
If you are unsure when your off peak supply is available, contact your electricity provider.
Dimplex UK Ltd, Millbrook House, Hedge End, Southampton, SO30 2DF. For further assistance please contact Dimplex customer services on 0845 600 5111. Web-site: www.dimplex.co.uk
Advertisement
