Table of Contents
Advertisement
Preparing the Answering System
•In step 7, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter "0100", and select "PM" by pressing (*).)
If a power failure occurs, the time may be shifted. When "
on the base unit display, reprogram the current day/time.
To check the time/day
Repeat steps 1 to 6 on page 25.
•The current time/day is heard. When finished, press (FUNCTION/EXIT/CH).
For Call Display service users
•The Call Display information will re-set the clock after the first ring if the
adjusted time is incorrect. However, the day will not be re-set. Set the day
following the procedures on pages 25.
•If the time has not previously been set, the Call Display information will not
adjust the clock.
•The Call Display information will automatically adjust the clock for daylight
saving time.
26
(p. 32)
" flashes
Advertisement
Table of Contents
