HP Integrity BL860c i2 Installation Manual page 25

6. Secure the heatsink to the processor
a. Slide both plastic locking tabs into place (see callout 1 in the image below).
b. Flip the latch down (see callout 2 in the image below).
WARNING!
on top of the lever during installation to avoid personal injury.
CAUTION:
the processor module from the processor's heatsink after they have been coupled.
7. Connect the power cord (see callout 3 in the image above).
The heatsink locking lever can constitute a pinch hazard, keep your hands
To prevent thermal instability and damage to the server, do not separate
Installing additional components 25