Table of Contents
Advertisement
Quick Links
W6138
Product features and decorations may vary from the photograph.
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required. Tools required for assembly: Phillips Screwdriver,
Hammer and Scrap Block of Wood (not included).
Requires three "AA" batteries (included).
Age: 2-6 years.
Weight limit: 60 lbs (27 kg).
Choose areas for riding that are free of obstacles.
Learn to stop safely.
Use with caution as this product requires skill to operate safely to avoid falls, collisions,
and injuries to yourself (the rider) and others.
IMPORTANT! It is good practice to start training children very young regarding the importance of helmet use. When children
are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they ride. For this
reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes a habit
for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets.
fisher-price.com
Advertisement
Table of Contents
Related Manuals for Fisher-Price W6138
Summary of Contents for Fisher-Price W6138
- Page 1 W6138 Product features and decorations may vary from the photograph. Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Requires three "AA" batteries (included). Age: 2-6 years. Weight limit: 60 lbs (27 kg). Choose areas for riding that are free of obstacles. Learn to stop safely. Use with caution as this product requires skill to operate safely to avoid falls, collisions, and injuries to yourself (the rider) and others. IMPORTANT! It is good practice to start training children very young regarding the importance of helmet use. When children are older and riding bicycles and faster vehicles, it is important that they use a helmet each and every time they ride. For this reason, even while riding a tricycle, it is a good idea to familiarize your child with helmet use, so that it becomes a habit for life. Choose a helmet that complies with requirements of the applicable certifying agency for bicycle helmets. fisher-price.com...
-
Page 2: Consumer Information
Consumer Information WARNING FASTENERS SHOWN ACTUAL SIZE TO AVOID SERIOUS INJURY: • Continuous adult supervision is required. • Never use near cars and other motor vehicles, #6 x ½" (1,3 cm) Screw – 3 #8 x " (1,9 cm) Screw – 4 near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes. Cap Nut – 1 • Never allow more than one rider. #8 x 3" (7,6 cm) Screw – 1 • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry cloth before assembly. • Some parts shown are assembled to both sides of the trike. • Tighten assembled screws with a Phillips screwdriver. Do not over-tighten the screws. • Parts not shown: labels and assembly tool. Headlight Handlebar Cover Seat Frame Seat Retainer Straight Axle Fork 2 Hubcaps 2 Fork Covers Front Wheel Axle Assembly... - Page 3 Assembly CAUTION Hubcap Cap Nut (Peg Side Down) This product contains small parts Rear Wheel in an unassembled state. (Indented Side Up) Adult assembly is required. Cover Straight Axle Frame Hubcap Cap Nut Assembly Tool Assembled Rear Wheel Rear Wheel Scrap Block (Indented Side of Wood Down) Hubcap (Peg Side • Turn the frame on its side with the exposed end of the straight axle up. Straight Axle • Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut. • Slide a rear wheel (indented side up) onto the end of the • Slide a hubcap (peg side up) onto the straight axle.
- Page 4 Assembly Pedal Hubs Pedal Axle Assembly Front Wheel Pedal Pedal Axle • While holding the pedal hubs on the pedal axle assembly, insert the pedal axle through the hole in the center of the Scrap Block front wheel. of Wood • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Fit the pedal on the pedal axle. Tap the pedal with Pedal Hub a hammer until it is secure. • Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with the hammer again. Fork Arms Fork Cover Pedal Hub Groove • Turn the front wheel assembly over. • Insert the remaining pedal hubs on top of and below the Pedal Axle pedal axle and into the hole in the center of the front wheel. • Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel. • Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
- Page 5 Assembly Headlight Cover Handlebar Frame Neck Fork Post Fork Cover • Fit the the headlight cover onto the front of the handlebar. • Insert three #6 x " (1,3 cm) screws into the headlight Rear of Trike cover. Tighten the screws. Seat Retainer Seat • Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels. • Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so Peg that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.
-
Page 6: Label Decoration
Label Decoration Attaching the Seat Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fit on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down. -
Page 7: Battery Replacement
Battery Replacement Battery Safety Information Note: For best performance, we recommend replacing the In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid batteries that came with this trike with three, new "AA" (LR6) battery leakage: alkaline batteries. • Do not mix old and new batteries or batteries of different Headlight Cover types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak. • Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. • Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the product before charging. • If removable, rechargeable batteries are used, they are only to be charged under adult supervision. FCC Statement (United States Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 • Loosen and remove the screws from the headlight cover. -
Page 8: Consumer Assistance
CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Seat Retainer Tab Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com.