Panasonic PT-DZ21KU Operating Instructions Manual page 69

■ To adjust desired white balance ▶
4) Select [USER1] or [USER2] in Step 3).
5) Press the <ENTER> button.
▶
z The [COLOR TEMPERATURE] screen is
displayed.
6) Press ▲▼ to select [WHITE
BALANCE].
7) Press the <ENTER> button.
▶
z The [WHITE BALANCE] screen is displayed.
8) Press ▲▼ to select [WHITE BALANCE
HIGH] or [WHITE BALANCE LOW].
9) Press the <ENTER> button.
▶
z The [WHITE BALANCE HIGH] screen or the
[WHITE BALANCE LOW] screen is displayed.
10) Press ▲▼ to select [RED], [GREEN],
and [BLUE].
11) Press ◀▶ to adjust the level.
Item Operation
Press ▶ .
[RED]
Press ◀ .
Press ▶ .
[GREEN]
Press ◀ .
Press ▶ .
[BLUE]
Press ◀ .
■ To adjust desired white balance ▶
based on existing color
temperature settings
4) Select a setting other than [DEFAULT],
[USER1], or [USER2] in Step 3).
5) Press the <ENTER> button.
▶
z The [CHANGE TO *****] screen is displayed.
6) Press ▲▼ to select [USER1] or
[USER2].
▶
z The status of the color temperature changed is
saved to the selected item.
7) Press the <ENTER> button.
▶
z The confirmation screen is displayed.
Adjustment Range
Deepens
Maximum
red.
value
Weakens
High: 255
red.
Low: 127
Deepens
Minimum
green.
value
Weakens
High: 0
green.
Low: –127
Deepens
Default
blue.
High: 255
Weakens
Low: 0
blue.
[PICTURE] menu
8) Press ◀▶ to select [OK], and press
the <ENTER> button.
▶
z The [USER1] or [USER2] data is overwritten.
z If you press ◀▶ to select [CANCEL] and then ▶
press the <ENTER> button, the data will not be
overwritten.
▶
z The [WHITE BALANCE HIGH] screen is
displayed.
Press ▲▼ to select [RED], [GREEN],
9)
and [BLUE].
10) Press ◀▶ to adjust the level.
Note
z Adjust [COLOR TEMPERATURE] correctly.
All colors will not be displayed properly unless
adequate adjustment is made. If the adjustment
does not look suitable, you can press the
<DEFAULT> button on the remote control to return
the setting for the selected item only to the factory
default setting.
z When color temperature has been changed, the
colors before and after the change will differ slightly.
■ To change the name of [USER1] ▶
or [USER2]
4) Select [USER1] or [USER2] in Step 3).
5) Press the <ENTER> button.
▶
z The [COLOR TEMPERATURE] screen is
displayed.
6) Press ▲▼ to select [COLOR
TEMPERATURE NAME CHANGE].
7) Press the <ENTER> button.
▶
z The [COLOR TEMPERATURE NAME
CHANGE] screen is displayed.
8) Press ▲▼◀▶ to select the character,
and press the <ENTER> button to
enter the character.
9) Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
▶
z The name set to color temperature is changed.
Note
z When a name is changed, display of [USER1] and
[USER2] on the menu is also changed.
ENGLISH - 69