Panasonic PT-DZ21KU Operating Instructions Manual page 126

[SECURITY] menu
8) Press ▲▼ to select [POWER
BUTTON], [INPUT SELECT BUTTON],
[MENU BUTTON], [LENS BUTTON],
[AUTO SETUP BUTTON], [SHUTTER
BUTTON], or [OTHER BUTTON].
▶
z Use the following items to enable/disable
buttons on the projector body.
[POWER
BUTTON]
[INPUT SELECT
BUTTON]
[MENU
BUTTON]
[LENS
BUTTON]
[AUTO SETUP
BUTTON]
[SHUTTER
BUTTON]
[OTHER
BUTTON]
*1: PT-DZ21KU and PT-DS20KU only
9) Press ◀▶ to switch the item.
▶
z The setting will change as follows each time
you press the button.
[ENABLE]
[ENABLE] Enables button operations.
[DISABLE] Disables button operations.
▶
z The following items are available when [SDI1/2
BUTTON] is selected in [INPUT SELECT
BUTTON] on PT-DZ21KU or PT-DS20KU.
Switches between SDI1 and SDI2
[TOGGLE]
during button operations.
[SDI1] Fixes to SDI1.
[SDI2] Fixes to SDI2.
[DISABLE] Disables button operations.
▶
z When [INPUT SELECT BUTTON] is selected in
Step 8), press the <MENU> button to return to
the [CONTROL PANEL] screen.
10) Press ▲▼ to select [APPLY], and
press the <ENTER> button.
▶
z The confirmation screen is displayed.
11) Press ◀▶ to select [OK], and press
the <ENTER> button.
■ To set [REMOTE CONTROL] ▶
▶
z You can set the limitation on the control from
the remote control.
4) Select [REMOTE CONTROL] in Step 3).
126 - ENGLISH
Power standby < > button and
power on < > button
<VIDEO> button, <RGB1> button,
<RGB2> button, <DVI-D> button,
<HDMI> button, and <SDI 1/2>
button
*1
<MENU> button
<LENS> button
<AUTO SETUP> button
<SHUTTER> button
▲▼◀▶ buttons, <ENTER>
button
[DISABLE]
5) Press the <ENTER> button.
▶
z The [REMOTE CONTROL] screen is displayed
6) Press ◀▶ to switch [REMOTE
CONTROL].
▶
z The setting will change as follows each time
you press the button.
[ENABLE] [DISABLE]
Enables all button operations from
[ENABLE]
the remote control.
Disables all button operations
[DISABLE]
from the remote control.
Operation of all buttons on the
[USER] remote control can be enabled/
disabled separately.
7) Press ▲▼ to select [APPLY], and
press the <ENTER> button.
▶
z The confirmation screen is displayed.
8) Press ◀▶ to select [OK], and press
the <ENTER> button.
▶
zEnabling/disabling any remote control
button
7) Select [USER] in Step 6).
▶
z Setting items can be selected for the buttons on
the remote control.
8) Press ▲▼ to select [POWER
BUTTON], [INPUT SELECT BUTTON],
[MENU BUTTON], [LENS BUTTON],
[AUTO SETUP BUTTON], [SHUTTER
BUTTON], [ASPECT BUTTON], [ON
SCREEN BUTTON], or [OTHER
BUTTON].
▶
z Use the following items to enable/disable
buttons on the remote control.
[POWER Power standby < > button and
BUTTON] power on < > button
<VIDEO> button, <RGB1> button,
[INPUT SELECT <RGB2> button, <DVI-D> button,
BUTTON]
<HDMI> button, and <SDI 1/2>
button
[MENU
<MENU> button
BUTTON]
[LENS <FOCUS> button, <ZOOM>
BUTTON] button, <SHIFT> button
[AUTO SETUP
<AUTO SETUP> button
BUTTON]
[SHUTTER
<SHUTTER> button
BUTTON]
[ASPECT
<ASPECT> button
BUTTON]
[ON SCREEN
<ON SCREEN> button
BUTTON]
[OTHER
Buttons not listed above
BUTTON]
*1: PT-DZ21KU and PT-DS20KU only
[USER]
*1