Panasonic PT-DZ21KU Operating Instructions Manual page 116

[PROJECTOR SETUP] menu
■ To call the lens position ▶
4) Select [LENS MEMORY LOAD] in Step
3).
5) Press the <ENTER> button.
▶
z The [LENS MEMORY LOAD] screen is
displayed.
6) Press ▲▼ to select the item to
initialize, and press the <ENTER>
button.
7) When the confirmation is displayed,
select [OK], and press the <ENTER>
button.
▶
z Moves automatically to the registered shift,
zoon and focus positions.
Note
z Lens memory is not guaranteed to be 100%
reproduced.
z The zoom and focus positions may have shifted
after lens memory was called. Readjust as
necessary.
Beware of shift, as errors in zoom position are
particularly significant.
z When a lens is replaced, readjust and save the lens
memory again.
z If a lens without zoom function is used, the lens
memory of the zoom position does not operate.
z When using the <FUNC> button to assign a [LENS
MEMORY LOAD], the lens memory is called in
order each time you press the <FUNC> button.
■ To delete a lens memory ▶
4) Select [LENS MEMORY EDIT] in Step
3).
5) Press the <ENTER> button.
▶
z The [LENS MEMORY EDIT] screen is
displayed.
6) Press ▲▼ to select [LENS MEMORY
DELETE].
7) Press the <ENTER> button.
▶
z The [LENS MEMORY DELETE] screen is
displayed.
8) Press ▲▼ to select the item to delete,
and press the <ENTER> button.
9) When the confirmation is displayed,
select [OK], and press the <ENTER>
button.
116 - ENGLISH
■ To change the lens memory name ▶
4) Select [LENS MEMORY EDIT] in Step
3).
5) Press the <ENTER> button.
▶
z The [LENS MEMORY EDIT] screen is
displayed.
6) Press ▲▼ to select [LENS MEMORY
NAME CHANGE].
7) Press the <ENTER> button.
▶
z The [LENS MEMORY NAME CHANGE] screen
is displayed.
8) Press ▲▼ to select the name to
change, and press the <ENTER>
button.
▶
z Lens memory name screens are displayed.
9) Press ▲▼◀▶ to select the text, and
press the <ENTER> button to enter the
text.
10) After the name is changed, press
▲▼◀▶ to select [OK], and press
<ENTER>.
▶
z The registration completes and returns to the
[LENS MEMORY NAME CHANGE] screen.
z If you press ▲▼◀▶ to select [CANCEL] and ▶
then press the <ENTER> button, the changed
name will not be registered.
z If you press ▲▼◀▶ to select [DEFAULT] and ▶
press the <ENTER> button, the changed name
will not be registered and the default name will
be used.
▶
z If you select [OK] without entering any
characters and press the <ENTER>button, the
default name will be used.