Table of Contents
Advertisement
4.
Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA
1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the
standard parallel ATA with 133MB/s (Ultra DMA133).
M4N68T-M SATA connectors
• Install the Windows
• The motherboard does not provide a floppy disk drive connector. You could use a USB
• Due to Windows
• For more details on RAID/AHCI, refer to the RA ID/AHCI Supplementary Guide included
5.
Internal speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
M4N68T-M Speaker Out Connector
1-24
M4N68T-M
XP Service Pack 2 or later versions before using Serial ATA.
®
floppy disk drive when installing Windows
that includes a RAID/AHCI set.
XP limitation, Windows
®
drive.
in the folder named Manual in the support DVD.
M4N68T-M
SATA2
SATA4
SATA1
SATA3
XP operating system on a hard disk drive
®
XP may not recognize the USB floppy disk
®
SPEAKER
PIN 1
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
