Dram Timing Configuration - Asus M3A78-T User Manual

DRAM Timing Configuration

Advanced
DRAM Timing Configuration
Memory Clock Mode
2T Mode
DRAM Timing Mode
The configuration options for some of the following items vary depending on the
DIMMs you install on the motherboard.
Memory Clock Mode [Auto]
Allows selection of the DRAM Frequency programming method.
Configuration options: [Auto] [Limit] [Manual]
Memclock Value [400 MHz]
This sub-item appears only when you set the Memory Clock Mode item to
[Limit] and [Manual].
Configuration options: [400 MHz] [533 MHz] [667 MHz] [800 MHz] [1066
MHz]*
2T Mode [Auto]
Allows selection of the 2T Mode.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Timing Mode [Auto]
Allows selection of the DRAM Timing Mode.
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
The following sub-items appear only when you set the DRAM Timing Mode item
to [DCT 0]. [DCT 1], and [Both].
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK
DH_Only]
TCWL [Auto]
Configuration options: [Auto] [5 CLk] [6 CLK] [7 CLK] [8 CLK]
TRCD [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRAS [Auto]
Configuration options: [Auto]
4-20
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
Options
Auto
Limit
Manual
depending on the
Chapter 4: BIOS setup