Table of Contents
Advertisement
CPU Temperature [xxx ºC/xxx ºF]
MB Temperature [xxx ºC/xxx ºF]
The onboard hardware monitor automatically detects and displays the CPU,
motherboard and power temperatures. Select Disabled if you do not wish
to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
Chassis Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
and chassis fan speeds in rotations per minute (RPM). If any of the fans is
not connected to the motherboard, the specific field shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V
Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
Smart Q-Fan function [Disabled]
Allows you to enable or disable the smart Q-fan control function. When
this field is set to [Enabled], the item Fan Auto Mode Start Speed, Fan
Auto Mode Start Speed Temp, and Fan Auto Mode Full Speed Temp items
appear. Configuration options: [Disabled] [Enabled]
Fan Auto Mode Start Speed [40%]
Sets the fan auto mode start speed. Configuration options: [20%] [40%]
[60%] [80%]
Fan Auto Mode Start Speed Temp [25ºC]
Sets the fan auto mode start speed temperature.
Configuration options: [25ºC] [26ºC] - [50ºC]
Fan Auto Mode Full Speed Temp [55ºC]
Sets the fan auto mode full speed temperature.
Configuration options: [55ºC] [56ºC] - [75ºC]
CPU temperature beep function [Enabled]
Enables or disables the CPU temperature beep function.
Configuration options: [Enabled] [Disabled]
CPU temperature high limit [95 degree]
Disables or sets the CPU temperature high limit.
Configuration options: [Disabled] [95 Degree] [85 Degree] [75 Degree]
[65 Degree]
2-28
Chapter 2: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
