3.
Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk and optical disk drives that allows up to 150 MB/s data
transfer rates, faster than the standard parallel ATA with 133 MB/s
(Ultra DMA133).
If you install Serial ATA hard disk drives, you can create a RAID 0,
RAID 1, and JBOD configuration through the onboard VIA
Plus controller.
M2V-TVM SATA connectors
Important note on Serial ATA
Install the Windows
Pack1 before using Serial ATA.
•
For detailed instructions on how to configure RAID 0, 1, and
JBOD, refer to the RAID manual in the support CD.
•
The RAID function of these connectors is set to [Disabled] by
default. See section "2.4.4 Onboard Device Configuration" for
details.
ASUS M2V-TVM
M2V-TVM
2000 Service Pack 4 or the Windows
®
SATA2
SATA1
VT8237R
®
XP Service
®
1-23