Table of Contents
Advertisement
✿✤✦✪✣5Z✮_5.❇m 5✦
Remote Operation from a Touch Tone Phone
Direct Remote Operation
Once you have entered the remote code, you can also control your unit by direct
commands instead of using the voice menu. To end remote operation, hang up
anytime.
Direct commands
[4] :
Plays back new
messages.
[5] :
Plays back all messages.
[1] :
Repeats the current
message.
• If pressed within the first
5 seconds of playback,
the previous message will
be played.
[2] :
Skips the current
message.
[3] :
Changes the playback
speed to slow/normal.
[9] :
Stops the current
operation.
• To resume operation, enter
a direct command within
15 seconds, or the voice
menu will start (p. 52).
To turn on the Answering System:
Call your unit and wait for 15 rings.
• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote code for
other options.
• When turning on the Answering System using a rotary or pulse service telephone,
you cannot enter the remote code for other options.
Skipping the greeting
After calling your unit, press [ ] during the greeting.
• The unit skips the rest of the greeting and you can start recording your message
after a long beep.
]
]
_
[7] :
Records a greeting
message.
After a long beep, talk for up
to 2 minutes.
[9]
Recording is stopped. The
recorded message is
played.
[ ] [4] : Erases the current
message.
• A short beep will sound
and the next message will
be played.
[ ] [5] : Erases all messages.
• A long beep will sound
and " No messages " will be
heard.
[0] :
Turns off the Answering
System.
• The unit hangs up.
53
Advertisement
Table of Contents
