Creating A Raid 1 Array - Asus INTEL TUSL2 User Manual

5. SOFTWARE SETUP

5.4.4 Creating a RAID 1 Array

1. In the FastBuild™ Utility Main Menu, select Auto Setup [1].
FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application to use:
Mode ........................................
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 14645
[ ] Up [ ] Down
2. Go to the field Optimize Array for: and select Security. The Mode field displays
Mirror.
3. After making the selection, use <Ctrl-Y> to save it. FastBuild™ offers a choice
between two options. Use <Y> for Create and Duplicate to mirror a pre-existing
hard disk formatted with data that you want to save on both hard disks; (Go to
step 4.) Use <N> for Create Only if using two new hard disks to configure a
new RAID 1 mirrored array; (Go to step 6.)
Do you want the disk image to be
duplicated to another?(Yes/No)
Y -Create and Duplicate
N -Create Only
4. If selecting <Y>, for Create and Duplicate, this screen will be displayed:
FastBuild (tm) Utility 1.31 (c) 1996-2000 Promise Technology, Inc.
Channel:ID Channel:ID
------ ------
Channel:ID
Channel:ID
------
------
Channel:ID Channel:ID
1:Mas ST3322IA
1:Sla ST3322IA
[ ] Up [ ] Up [ ] Down [ ] Down
[ Auto Setup Options Menu ]
Not Available
[ Array Setup Configuration ]
[ Keys Available ]
[ , ,Space] Change Option
[ Source DiSk ]
Drive Model Drive Model
--------- ---------
[ Target Disk ]
Drive Model
Drive Model
---------
---------
[ Please Select A Source Disk ]
Drive Model Drive Model
[ Keys Available ]
[ESC] Exit [ESC] Exit [Enter] Select [Enter] Select
ASUS TUSL2 User's Manual
Security
Mirror
[ESC] Exit [CTRL-Y] Save
Capacity (MB) Capacity (MB)
------- -------
Capacity (MB)
Capacity (MB)
-------
-------
Capacity (MB) Capacity (MB)
3077
3077
87