Software Setup; Install Operating System; Start Windows - Asus INTEL TUSL2 User Manual

Intel 815e atx motherboard

Table of Contents

5. SOFTWARE SETUP

You should always use the latest operating system and updates when using new

hardware to ensure full compliancy. You may use any version of Windows 98/2000/

Millenium, but for Windows 95, you must use OSR 2.0 or later. For Windows NT

4.0, you must use Service Pack 3.0 or later.

NOTE: To configure your system to use the RAID 0 or 1 option, you must run the

FastTrack100™ BIOS before installing the OS. Normally, this firmware will be

activated automatically when the ATA100 and RAID 0 or 1 jumpers have been ad-

justed correctly; (see Section 3.4.5 Motherboard Settings, Hardware Setup and Sec-

tion 5.5 Manual Installation fo IDE/RAID Drivers for more information about driver

installation.)

When you start Windows 98 for the first time after installing your motherboard,

Windows will detect all plug-and play devices. Follow the Add New Hardware Wiz-

ard to install all necessary device drivers. When prompted to restart, select No and

then follow the setup procedures in this section.

NOTE: Because there are various motherboard settings, options, and expansion

cards, the following can only be used as a general reference and may not reflect

exactly the screen contents displayed on your screen.

ASUS TUSL2 User's Manual

Table of Contents