Asus INTEL TUSL2 User Manual page 40

3. HARDWARE SETUP
17) ASUS iPanel Audio Connector (12-1 pin AAPANEL)
Connect the audio cable from the optional ASUS iPanel to this for front panel
audio control.
COM1
TUSL2
TUSL2 Audio Panel Connectors
18) Chassis Intrusion Lead (2-pin ACHA)
This lead is for a chassis designed for chassis intrusion detection. After-market
toggle switches may also be installed to the chassis panel or on any removable
components. Two wires should be available from the chassis to connect to this
lead. When any chassis component is removed, the contact should open and the
motherboard will record a chassis intrusion event. (The event can then be
processed by software such as LDCM.) If the chassis intrusion lead is not used,
a jumper cap must be placed over the pins to close the circuit.
COM1
TUSL2
TUSL2 Chassis Open Alarm Lead
40
®
®
ACHA
ASUS TUSL2 User's Manual
AAPANEL