GIANT DRYER
Front Cabinet Cover
Door Reversal
DLE9577/DLG9588
DISASSEMBLY/REPAIR
1.
2.
3.
4.
5.
1.
2.
3.
4.
Page 43 of 58
Remove the control panel
assembly or the blank cover on
the top is the controls are
installed in the lower position.
Open the door.
Remove the two screws toward
the bottom of the door opening.
(See drawing.)
Remove the four screws along
the top of the front cover.
(See drawing.)
Tip the front panel forward to
disconnect the door switch
before removing the panel.
Set it aside on a pad or an old
blanket with the door closed.
Remove the two screws that
hold the door. Remove the door
and set it aside on a soft,
protective pad. Save the
hinge shim.
Remove the two screws near
the latch.
Remove the two screws and the
latch piece.
Rotate everything 180° and
reinstall the door so it opens
from the other side.
TRAINING MANUAL