Dodge Charger 2011 Owner's Manual page 312

310 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: If the vehicle is equipped with Keyless Enter-
N-Go (Passive Entry) and the EVIC is programmed to
Unlock All Doors 1st Press, all doors will unlock no
matter which Passive Entry equipped door handle is
grasped. If Driver Door 1st Press is programmed, only
the driver's door will unlock when the driver's door is
grasped. With Passive Entry, if Driver Door 1st Press is
programmed touching the handle more than once will
only result in the driver's door opening. If driver door
first is selected, once the driver door is opened, the
interior door lock/unlock switch can be used to unlock
all doors (or use RKE transmitter).
• Passive Entry
This feature allows you to lock and unlock the vehicle's
door(s) without having to press the RKE transmitter lock
or unlock buttons. To make your selection, press the
Passive Entry soft-key, select ON or OFF followed by
pressing the arrow back soft-key. Refer to "Keyless
Enter-N-Go" in "Things To Know Before Starting Your
Vehicle".
• Personal Settings Linked to FOB
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle. To make your selection, press the Memory
Linked to FOB soft-key, select ON or OFF followed by
pressing the arrow back soft-key.
NOTE: The seat will return to the memorized seat
location (if Recall Memory with Remote Key Unlock is set
to ON) when the RKE transmitter is used to unlock the
door. Refer to "Driver Memory Seat" in "Understanding
The Features Of Your Vehicle" for further information.