Dodge Charger 2011 Owner's Manual page 307

Safety / Assistance
• Front Collision Sensitivity
The Front Collision Warning (FCW) feature can be can be
set to Far, set to Near or turned Off. The default status of
FCW is the Far setting. This means the system will warn
you of a possible collision with the vehicle in front of you
when you are farther away. This gives you the most
reaction time. To change the setting for more dynamic
driving select the Near setting. This warns you of a
possible collision with the vehicle in front of you when
you are much closer. This allows for a more dynamic
driving experience. To change FCW status press and
release the Off, Near or Far button followed by pressing
the arrow back soft-key.
For further information, refer to "Adaptive Cruise Con-
trol (ACC)" in "Understanding The Features Of Your
Vehicle".
UNDERSTANDING YOUR INSTRUMENT PANEL 305
• Park Assist
The Rear Park Assist system will scan for objects behind
the vehicle when the transmission shift lever is in RE-
VERSE and the vehicle speed is less than 11 mph
(18 km/h). The system can be enabled with Sound Only,
Sound and Display, or turned OFF. To change the Park
Assist status press and release the Off, Sound Only or
Sounds and Display button followed by pressing the
arrow back soft-key. Refer to "Rear Park Assist System"
in "Understanding The Features Of Your Vehicle" for
system function and operating information.
• Tilt Mirrors In Reverse
When this feature is selected, the outside rearview mir-
rors will tilt downward when the ignition is in the RUN
position and the transmission shift lever is in the RE-
VERSE position. The mirrors will move back to their
previous position when the transmission is shifted out of
4