Dodge Charger 2011 Owner's Manual page 294

292 UNDERSTANDING YOUR INSTRUMENT PANEL
Safety / Assistance
• Front Collision Warning
Press the Front Collision Warning soft-key to change this
display. The Front Collision Warning (FCW) feature can
be can be set to Far, set to Near or turned Off. The default
status of FCW is the Far setting. This means the system
will warn you of a possible collision with the vehicle in
front of you when you are farther away. This gives you
the most reaction time. To change the setting for more
dynamic driving select the Near setting. This warns you
of a possible collision with the vehicle in front of you
when you are much closer. This allows for a more
dynamic driving experience. To change FCW status press
and release the Off, Near or Far button followed by
pressing the arrow back soft-key.
For further information, refer to "Adaptive Cruise Con-
trol (ACC)" in "Understanding The Features Of Your
Vehicle".
• Park Assist
Press the Park Assist soft-key to change this display. The
Rear Park Assist system will scan for objects behind the
vehicle when the transmission shift lever is in REVERSE
and the vehicle speed is less than 11 mph (18 km/h). The
system can be enabled with Sound Only, Sound and
Display, or turned OFF. To change the Park Assist status
press and release the Off, Sound Only or Sounds and
Display button followed by pressing the arrow back
soft-key. Refer to "Rear Park Assist System" in "Under-
standing The Features Of Your Vehicle" for system func-
tion and operating information.
• Tilt Mirrors in Reverse
Press the Tilt Mirrors in Reverse soft-key to change this
display. When this feature is selected, the outside rear-
view mirrors will tilt downward when the ignition is in
the RUN position and the transmission shift lever is in
the REVERSE position. The mirrors will move back to
their previous position when the transmission is shifted