Replacing The Battery - Ford 2016 C-MAX HYBRID Owner's Manual

Table of Contents

Advertisement

Type 2
E142431
Slide the release on the back of the
transmitter to release the key blade, then
pull the blade out.
E138618
Note: Your vehicle s back-up keys came
with a security tag that provides important
vehicle key cut information. Keep the tag in
a safe place for future reference.

Replacing the Battery

Note: Refer to local regulations when
disposing of transmitter batteries.
Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.
Note: Replacing the battery does not delete
the transmitter from the vehicle. The
transmitter should operate normally.
The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.
C-MAX (CCG) Canada/United States of America, enUSA, First Printing
Keys and Remote Controls
Integrated Keyhead Transmitter
E138619
1.
Twist a thin coin in the slot of the
transmitter near the key ring to remove
the battery cover.
2. Remove the old battery.
E138620
3. Insert the new battery. Refer to the
instructions inside the transmitter for
the correct orientation of the battery.
Press the battery down to make sure
it is fully in the housing.
4. Snap the battery cover back onto the
transmitter.
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

2016 c-max energiC-max hybridC-max energi

Table of Contents