The Roll Is Empty; Sheet Printing Is Selected - Canon iPF6200 User Manual

Messages regarding paper

The roll is empty.

There is no more paper left on the roll.
*If this message is displayed, you can resume the print job.
Roll feed unit err
The Roll Feed Unit is not working.
No Roll Feed Unit.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.

Sheet printing is selected.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
692 Error Message
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Cause
Cause
Corrective Action
Follow the steps below to replace the used roll with a
new roll of the same type and size.
1.
Remove the roll.
(→P.124)
(→P.125)
(→P.126)
2.
Load the new roll.
(→P.119)
(→P.121)
(→P.122)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.117)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.118)
Corrective Action
Turn off the printer, remove the Roll Feed Unit
momentarily, and then reinstall it.
(→P.146)
(→P.147)
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
Corrective Action
Install the Roll Feed Unit and resend the print job.
(→P.147)
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print. (→P.93)