Interface Setup - Canon iPF6200 User Manual

Interface Setup

EOP Timer
TCP/IP IP Mode
Protocol
IP Setting
NetWare NetWare
Frame Type
Print Service
AppleTalk
Ethernet Auto Detect
Driver
Comm.Mode
Ethernet Type
Spanning
Tree
MAC Address
Return
Defaults
Downloaded from ManualsPrinter.com Manuals
Setting Item
DHCP
BOOTP
RARP
IP Address
Subnet Mask
Default G/W
Description, Instructions
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is congured
automatically or a static IP address is entered manually.
Specify the protocol used to congure the IP address
automatically.
Specify the printer network information when using a static
IP address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply
your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic conguration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Displays the MAC address.
Execute? is displayed if you press the ▼ button. Choose
OK to restore the network settings to the default values.
Control Panel
Printer Parts 65