Table of Contents
Advertisement
● OPERATING INSTRUCTIONS ●
P
REPARATION
BEFORE OPERATION
Setting the installation position
Be sure to set the slide switch inside the remote controller in accordance with
the installed position of the indoor unit.
Installation position:
Left:
Distance to objects (wall, cabinet, etc.) is less than 19-11/16 in. (50 cm)
to the left
Center: Distance to objects (wall, cabinet, etc.) is more than 19-11/16 in. (50
cm) to the left and right
Right:
Distance to objects (wall, cabinet, etc.) is less than 19-11/16 in. (50 cm)
to the right
(Left)
(Center)
(Right)
Area
Left
Slide switch
Remote controller
display
Press
during COOL mode to activate i-see control
operation.
• Press gently using a thin instrument.
•
lights. (Operation display section)
Press
again to release i-see control operation.
i-see control operation
The sensors constantly measure the room and
fl oor/wall temperature to automatically adjust to
the set temperature by estimating the tempera-
ture actually perceived by a person inside the
room ("sensible temperature").
i-see sensor
When the AREA setting is not activated, the sensing range of the i-see sensor
differs depending on the installation location of the air conditioner.
Installation position
Left
Sensing range
Note:
Do not touch the i-see sensor. This may cause malfunction of the i-see sensor.
En-5
Slide switch
Center
Right
Room
Floor/wall
temperature
temperature
30.9%
43.7%
Humidity
20.7%
Center
Right
A
REA SETTING
Press
to select AREA. Each press changes
AREA in the following order:
(AUTO)
(Left)
• The i-see control operation has to be active to select AREA.
• Horizontal airflow direction
set.
*1 Horizontal airflow direction set by
Press
until "Cancel" is selected to release AREA
setting.
• Pressing
also releases AREA setting.
Area
(AUTO) ....The i-see sensor detects temperature disparities, efficiently
cooling and heating the whole room.
In COOL mode:
Daytime
Warm area
(LEFT) /
(RIGHT)
Select the desired area to be air conditioned.
Indoor unit display
Horizontal airfl ow direction:
Left
Center or Swing
Cancel
(Right)
*1
cannot be selected when AREA is
.
Page 7
Nighttime
Cold area
Right
Lighted
Not lighted
Hide quick links:
Advertisement
Table of Contents
