System Requirements - American Dynamics Illustra Flex Series Quick Start Manual

2.2.9 System Requirements

Below table lists the minimum requirement to implement and operate a Illustra Flex Indoor Dome.
System Hardware
CPU Intel Pentium 4 2.4GHz or equivalent
RAM 1 GB or above
Display NVIDIA GeForce 6 Series or ATI Mobility Radeon 9500
System Software
Operating System Microsoft Windows XP, Windows Vista, or Windows 7
Browser Microsoft Internet Explorer 8 or above
Unit
Power Supply DC 12V / AC 24V / PoE
Networking
Wired* 10/100BASE-T Ethernet (RJ-45 connector)
*a switch is required for surveillance on multiple units.
Note All the installation and operations should comply with your local electricity safety rules.
Caution To avoid damage to the unit, never connect more than one type of power supply (PoE
IEEE802.3 Ethernet Class 0 or DC 12V / AC 24V power plug) at the same time. If using PoE,
this unit must be connecting only to PoE networks without routing to heterogeneous devices.
T 2-1: S R
ABLE YSTEM EQUIREMENTS
15
Illustra Flex 1MP & 3MP Indoor Dome